Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

The Part 66 B1 Basic Knowledge in Drawings One Topic per Page, Drawn So You Can Picture It When Someone Asks

For the Australian CASR Part 66 B1 modules, in metric units: Ohm's law, the gas laws, torque and safety wire, the four forces, the Dirty Dozen, hydraulics, the gas turbine and propellers. Every topic has its own page: the drawing first, then what you need to remember. 64 illustrated pages.

I WANT THE B1 BOOK + 2 BONUS BOOKS

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach part and system drawn as you see it on the aircraft, with the explanation beside it
64 illustrated pages64 illustrated pages: 9 parts, 60 topics, one per page
Up-to-date sourcesPart 66 Manual of Standards and CASR Parts 42, 43 and 145
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the formulas, figures and steps you need to know:

P1V1 ÷ T1 = P2V2 ÷ T2, with K = °C + 273.15. Figures are illustrative; precharge comes from the AMM.
P1V1 ÷ T1 = P2V2 ÷ T2, with K = °C + 273.15. Figures are illustrative; precharge comes from the AMM.
Lock wire pulls in the tightening direction and is never re-used
Lock wire pulls in the tightening direction and is never re-used
Setting = torque × L ÷ (L + E): 50 N·m becomes 37.5 N·m
Setting = torque × L ÷ (L + E): 50 N·m becomes 37.5 N·m
Pitch = lateral axis · roll = longitudinal axis · yaw = normal axis
Pitch = lateral axis · roll = longitudinal axis · yaw = normal axis
The Dirty Dozen: 12 factors, 12 hangar scenes, 1 safety net each
The Dirty Dozen: 12 factors, 12 hangar scenes, 1 safety net each
Reservoir to actuator in seven steps, and why red and purple fluid never meet.
Reservoir to actuator in seven steps, and why red and purple fluid never meet.
Bypass ratio = cold air bypassing the core ÷ hot air through the core
Bypass ratio = cold air bypassing the core ÷ hot air through the core
3 options, 1 correct, 75% to pass: the five-step night-before checklist
3 options, 1 correct, 75% to pass: the five-step night-before checklist

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 9 parts and 60 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're at the bench with a torque wrench and a crowfoot extension fitted, and the task card says 50 N·m. The LAME is waiting for the number you'll set.

The manual covers it in three paragraphs: wet values, dry values, lever length, effective length. It's all words, so under pressure it turns into a guess.

Setting = torque × L ÷ (L + E): 50 N·m becomes 37.5 N·m

In the book it's one page: a 30 cm wrench and a 10 cm extension drawn, L and E marked on them, the formula in a box. 50 N·m on the task card is 37.5 N·m on the wrench, and you can see why.

Same with safety wire, the gas laws, the three axes, the hydraulic system and bypass ratio: each one has its own page.

You understand it, you set it, and you don't have to reread the theory. In the module exam, the same drawing comes back to you.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: line after line
  • Locking devices explained only in words
  • You walk into the exam with doubts
Locking devices are employed to prevent the loosening of threaded fasteners under vibration and are to be selected in accordance with the applicable maintenance data. Safety wire shall be installed such that any tendency of the fastener to loosen is resisted by an increase in wire tension, which requires the wire to be routed in the tightening direction of the fastener. Wire previously installed shall not be reused. The number of twists per unit length, the wire diameter and the material shall conform to the specified standard, as shall the termination of the pigtail.
FOR THIS
  • Safety wire in one drawing
  • The rules in a box
  • You see it and you get it
Lock wire pulls in the tightening direction and is never re-used
CONTENTS

Take a Look at the 9 Parts and 60 Topics

Start here, maths and physics, electrical and digital, materials and hardware, aerodynamics, human factors and legislation, airframe systems, engines and propellers, and practice and revision: 64 pages, all illustrated.

IStart Here · pp. 5-7
  1. The 17 Modules on One Map
  2. How to Use This Book Between Shifts
  3. The Units You Meet in the Hangar
IIMaths and Physics · pp. 8-15
  1. Transposing a Formula Without Guessing
  2. Area, Volume and Ratios on the Aircraft
  3. Pressure and Pascal's Law
  4. The Gas Laws in One Drawing
  5. The International Standard Atmosphere
  6. Moments, Torque and Levers
  7. Newton's Three Laws on an Aircraft
  8. Bernoulli and the Venturi
IIIElectrical, Electronic and Digital · pp. 16-25
  1. Ohm's Law and the Triangle
  2. Series and Parallel, Side by Side
  3. Power and Kirchhoff's Laws
  4. Capacitors and the Time Constant
  5. Inductors, Magnetism and Transformers
  6. AC: Peak, RMS and 400 Hz
  7. Aircraft Batteries: Lead-Acid and Ni-Cd
  8. Diodes and Rectification
  9. Transistors as Switches
  10. Logic Gates and Binary
IVMaterials, Hardware and Maintenance Practices · pp. 26-34
  1. Aluminium Alloys and Steels
  2. Corrosion and the Galvanic Series
  3. Bolts: Reading the Hardware
  4. Locking Devices and Safety Wire
  5. Torque: Wet, Dry and the Extension Formula
  6. Riveting: Sizes and the Shop Head
  7. Pipes, Hoses and Fittings
  8. Non-Destructive Testing Methods
  9. Wiring: Crimps, Splices and Bonding
VAerodynamics and Flight Controls · pp. 35-40
  1. The Four Forces
  2. Angle of Attack Is Not Pitch Attitude
  3. The Lift Formula and the Stall
  4. Induced and Parasite Drag
  5. Stability on Three Axes
  6. Flight Controls, Tabs and High-Lift Devices
VIHuman Factors and Legislation · pp. 41-44
  1. The Dirty Dozen
  2. The Swiss Cheese Model and Fatigue
  3. Your B1 Licence: What You Can Sign
  4. Who Does What: Part 42, Part 43 and Part 145
VIIAirframe Systems · pp. 45-52
  1. Structures: Loads and Semi-Monocoque
  2. The Hydraulic System, Component by Component
  3. Landing Gear, Brakes and Tyres
  4. The Fuel System
  5. Pressurisation and Air Conditioning
  6. Ice and Rain Protection
  7. Fire Detection and Extinguishing
  8. Electrical Power Distribution
VIIIEngines and Propellers · pp. 53-60
  1. The Four-Stroke Piston Engine
  2. Magnetos and Ignition
  3. Mixture, Detonation and Pre-Ignition
  4. The Gas Turbine: Brayton Cycle
  5. Turbojet, Turbofan, Turboprop, Turboshaft
  6. Engine Start and EGT Limits
  7. Propellers: Blade Angle and Pitch
  8. Feathering and Reverse
IXPractice and Revision · pp. 61-64
  1. Fault Finding in 5 Steps
  2. Filling In a Task Card
  3. The Mix-Ups That Cost Marks
  4. The Night Before a Module Exam

One Page, One Topic, All Clear

Think of it this way:

It's the week before your gas turbine module exam and you still can't picture how a turbofan splits its air. A question can ask you to work with the bypass ratio, not just define it.

You open the page and see four turbine engines side by side, cut open: cold air going round the core, hot air going through it, and the ratio in a box.

The Dirty Dozen: 12 factors, 12 hangar scenes, 1 safety net each

Same with Ohm's law, torque with an extension, safety wire, the hydraulic system and the Dirty Dozen: each one on its own page.

B1 Aircraft Maintenance Illustrated is 9 parts and 60 topics, all drawn, with fault finding in 5 steps, a task card walk-through and revision pages at the end.

What you see drawn, you don't have to memorize.

What's Inside B1 Aircraft Maintenance Illustrated:

Ipp. 5-7

Start Here

The 17 modules on one map, how to use the book between shifts and the units you meet in the hangar.

IIpp. 8-15

Maths and Physics

Transposing formulas, area and volume, pressure, the gas laws, the standard atmosphere, moments, Newton and Bernoulli.

IIIpp. 16-25

Electrical, Electronic and Digital

Ohm's law, series and parallel, Kirchhoff, capacitors, transformers, AC and 400 Hz, batteries, diodes, transistors and logic gates.

IVpp. 26-34

Materials, Hardware and Maintenance Practices

The hardware you touch every shift: alloys, corrosion, bolts, safety wire, torque, rivets, fittings, NDT and wiring, each drawn so you can see why the rule exists.

Vpp. 35-40

Aerodynamics and Flight Controls

The four forces, angle of attack, lift and the stall, drag, stability on three axes and flight controls.

VIpp. 41-44

Human Factors and Legislation

The Dirty Dozen, the Swiss cheese model and fatigue, what your B1 licence lets you sign and who does what.

VIIpp. 45-52

Airframe Systems

Structures, hydraulics, landing gear and brakes, fuel, pressurisation, ice and rain, fire protection and electrical power.

VIIIpp. 53-60

Engines and Propellers

The four-stroke engine, magnetos, detonation, the Brayton cycle, four turbine types, engine start and EGT, and propellers.

IXpp. 61-64

Practice and Revision

Fault finding in 5 steps, filling in a task card, the most common mix-ups and the night before a module exam.

At the end of the book: The 17 modules on one map, fault finding in 5 steps and a page on the most common mix-ups.

Plus: 2 Free Books

B1 Practice Questions: Module by Module

BONUS 1: «B1 Practice Questions: Module by Module»

Value on its own: US$ 17.90

Exam-style multiple choice questions for each module, with every answer explained, so you can check what has stuck before you book the next exam.

15 Common B1 Mistakes, Before and After

BONUS 2: «15 Common B1 Mistakes, Before and After»

Value on its own: US$ 14.90

The mix-ups people make most often, from wet and dry torque to stall angle and airspeed, each shown wrong and then right on one page.

B1 Aircraft Maintenance Illustrated with 2 Free Books

  • B1 Aircraft Maintenance Illustrated: 64 illustrated pagesUS$ 63
  • BONUS 1: B1 Practice Questions: Module by ModuleUS$ 17.90
  • BONUS 2: 15 Common B1 Mistakes, Before and AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT B1 AIRCRAFT MAINTENANCE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you B1 Aircraft Maintenance Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're studying your B1 modules

You're studying your B1 modules

After a full shift, you open one page and see the topic drawn, instead of another chapter of text. One page a night adds up.

Your next module exam is close

Your next module exam is close

You revise each topic at a glance, check the formulas in their boxes and test yourself with the practice questions before you book.

You already work in the hangar

You already work in the hangar

You keep it printed in your toolbox to revise torque with an extension, safety wire or a hydraulic component on your break. On the job, the aircraft's maintenance data still rules.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT B1 AIRCRAFT MAINTENANCE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try B1 Aircraft Maintenance Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already work on aircraft and I'm sitting my modules between shifts?

Yes. It's written for people who already know the hands-on side and need the Part 66 theory clear and in order. Each topic fits on one page you can revise at a glance.

Where does the content come from?

From the Australian Part 66 Manual of Standards (B1 basic knowledge) and CASR Parts 42, 43 and 145, not the EASA version, explained in our own words and in metric units. Any figure that depends on the current amendment is flagged so you check it in the current version.

Is it official material?

No. It's an independent study guide, not affiliated with or endorsed by CASA or any exam provider.

Does it replace my course or training?

No. It helps you understand and revise the theory. It doesn't give you a certificate or count towards your licence: approved training, practical experience and the aircraft's maintenance data still come first.

Are the practice questions the ones in the exam?

No. They're written for this book, in exam style, so you can check what has stuck. They aren't official exam questions.

When and how does it arrive?

As a PDF by email, to the address you enter at checkout. The 2 bonus books come the same way. It's a one-off payment, with no subscription.

Does it cover every B1 module?

It takes you through all 17 modules on one map and gives the key topics of each one a page of its own: 64 pages in all. It isn't a full textbook with every detail of every B1 subcategory. It's the visual version you revise and print alongside your course notes.

Can I have it on paper?

Yes. The PDF prints on A4, so you can keep it in your toolbox or on the bench.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading with nothing sticking.

Torque with an extension: you see it drawn and that's it.

You walk into each module exam knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT B1 AIRCRAFT MAINTENANCE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.